Chewing gum remover POLY-2
The cleaning head can be fitted with up to 18 fine nozzles with maximum 350 bar operating pressure. The device is hand-held or used as an accessory for the removal of chewing gum and other stubborn dirt. It removes chewing gum from the base and it collects in a chamber, so that after cleaning it can be removed and disposed of easily. The chewing gum remover Poly-2 can be used on smooth surfaces with cold water or hot water up to 203 °F. Rough surfaces are cleaned with hot water at 185-203 °F.
Chewing gum remover - POLY-2
Pressure max. | 350 bar |
Spray angle | Point jet |
Temperature max. | 95 °C |
Housing | Plastic / stainless steel |
Noozle-size (table) | 030 - 080 |
Flow rate max. | 34 l/min |
Scala | 310 x 130 x 180 mm |
Weight | 2,0 kg |
Connection | see data sheet |
Item number |
see data sheet |
Data sheet |
Submit an enquiry
Would you like to get some advice?
Give up a call!
Tel. +49730792650
To submit an enquiry, please use our form.
Video
Downloads
Repair kits
Repair kit - Nozzle- and change filter set
Pressure max. | 350 bar |
Spay angle | Point jet |
Temperature max. | 90 °C |
Nozzle-size (table) | 030 - 080 |
Flow rate max. | 34 l/min |
Weight | 0,15 kg |
Item number |
see data sheet |
Data sheet |
Repair kit - Wearout runners
Temperature max. | 90 °C |
Housing | Plastic |
Weight | 0,1 kg |
Item number |
see data sheet |
Data sheet |
Repair kit - Replacement lid (2x)
Temperature max. | 90 °C |
Housing | Plastic |
Weight | 0,1 kg |
Item number |
see data sheet |
Data sheet |
Accessories